Create your own raised garden bed designs using Frame It All raised garden bed brackets and boards (sold separately). Use the 2” Tool-Free Snap-Lock 4-Way Bracing Bracket where 3 or 4 two-inch boards intersect, or to prevent frost pushout in long spans of boards. The 4-Way Bracket comes in two pieces that can be used either together (to create a hub) or separately at either end of a board to bridge a span where two boards intersect. Patented Snap-Lock brackets simply slide onto each end of a board and fasten securely with one Snap-lock button. An example of where you would use the 4-Way as a hub would be if you are creating an 8’ x 8’ raised bed with two Frame It All Insulating boards on each side of your square garden. If you would like to create 4 separated 4’ x 4’ spaces within your larger garden (and fortify it against frost push out) you would use the 4-Way Bracing Bracket in the center (as a hub or spoke), from which your four interior boards would radiate. In the same example, you would use one half of a 4-Way bracket to create a 3-Way connection at the opposite end of the boards where they join at the intersection of two exterior boards. When creating long gardens (8 feet or longer) use one half of a 4-Way bracket on either end of a bracing board to span across your raised garden bed where two boards butt together. This is only necessary when you stack levels and should be used every second level to prevent frost pushout. The 4-Way Bracket will keep your garden perfectly square regardless of what Mother Nature throws at it.
Did you know? Frost pushout is caused when water molecules in your soil freeze and thaw repeatedly during the winter. These cycles cause the soil to expand and push against the side walls of your raised garden, causing damage or shifting. This can be prevented by adding bracing boards to fortify any connections where two boards butt together. (Intersections at corners are not of concern) 2” Tool-Free Snap-Lock Anchor Brackets and 2” Tool-Free Snap-Lock Stacking Brackets also available to complete your design.
The Frame It All system of modular raised garden beds, borders, sandboxes and accessories was designed by our founder, Anthony Topping. As a professional landscape designer who spent many years creating high-end gardens in the Tri-State New York area, he felt there had to be a way to give homeowners the ability to easily create quality landscaping features and gardens for much less than paying a professional.
Here’s a note from Anthony on why he designed this product:
“The 4-Way Bracing Bracket was actually inspired by one of our customers who happened to be an engineer. The bracket connects one side of your garden to the other, locking the garden into a perfect square that will resist shifting over time. As a landscaper, I’ve built many retaining walls using landscape timbers, and although I don’t claim our brackets and boards are a substitute for heavy landscape timbers, I do see the potential of building a 3 to 6 level retaining wall using the 4-Way Bracing Brackets to create ‘dead men’ which tie back into the grade of the soil, anchoring the wall into the slope. I might just have to try this project this year!!” – Anthony
- Limited Lifetime Warranty (registration required)/5-year warranty (no registration)
- 2” snap-lock 4-way bracing bracket can be used with any 2” Frame It All 5.5” high composite snap-lock ready board
- Durable ABS plastic
- UV and temperature resistant
- Patented snap-lock tool-free system
- 4 - Tool-Free Snap-Lock Raised Garden Bed Bracing Brackets
- 1 - Stacking Stake
- 1 - Solid Finishing Cap
- 8 - Plugs / Locking Nubs
Warranty Information & Registration